NorTrac Tractor with Front End Loader — 30 HP

Save $1299 When You Buy this Tractor Package!Versatile and easy to use, our new category 1, 30 HP tractor comes with a handy double stage clutch and three point hitch. Three cylinder, water cooled four stroke engine with a maximum 2000 RPM. Eight forward and two reverse speeds. 540/720 PTO speeds. 10ft. long with a ground clearance of nearly one foot. Front end loader features dual torque tubes with double welded areas to create a strong, rugged support to the loaders mainframe. 8ft.5in. lift height and 60in. bucket size. High tensile steel pedestal for years of use. High strength mounting brackets for load distribution and GB tractor mounted joystick provides permanent dual remotes for the tractor. Truck ship. Includes Limited 6 Month Parts/Labor Warranty.Standard 5ft. material bucketLift capacity to full height: 1500 lbs.Breakaway capacity: 2900 lbs.Maximum lift height (ground to lower bucket pin): 8ft. 5in.Clearance with bucket dumped: 6ft. 7in.Reach at maximum height (front of tractor to front of bucket): 16in.Maximum dump angle: 50°Bucket rollback: 18° *Digging depth: 5in.Overall height in carry position: 4ft. 9in.Hydraulic control valve requirements: two spool selective control valve required for loader and hydraulic controlled bucket cylindersLift and bucket cylinders: double actingBucket control: hydraulic twin cylindersBucket cylinder size: 2in. bore x 16 3/4in. strokeLift cylinder size: 2in. bore x 22 3/4in. strokeApproximate weight with 5ft. bucket (less mounts): 629 lbs.Raising time: 7.0 secondsLowering time: 4.0 secondsBucket dump time: 5.0 secondsBucket rollback time: 3.5 seconds*NEVER ATTEMPT FULL ROLLBACK IN RAISED POSITION WITH FULL BUCKET.